SAE
Search Result: About 7445 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】SAE
- 【Document #】SAE J3011
Measurement and Characterization of Electronically Controlled All-Wheel Drive/Driveline Coupling Systems
- 【Date】2012/10/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE J335
Multiposition Small Engine Exhaust System Fire Ignition Suppression
- 【Date】2012/10/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE AMS5665N
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe - UNS N06600
- 【Date】2012/10/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE J246
Spherical and Flanged Sleeve (Compression) Tube Fittings
- 【Date】2012/10/1
- 【Reaffirmed Date】(R 2017)
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE AMS2261K
Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
- 【Date】2012/10/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE AMS2588
Ultrasonically Activated Needle Peen Forming
- 【Date】2012/10/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE J198
Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles
- 【Date】2012/10/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE AMS-DTL-23053/1A
(R) Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible
- 【Date】2012/9/1
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE J1306
(R) Motorcycle Auxiliary Front Lamps
- 【Date】2012/9/1
- 【Reaffirmed Date】(R 2018)
- 【Language】English
- 【Status】Active
- 【Organization】SAE
- 【Document #】SAE AMS4124E
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged - UNS A97075
- 【Date】2012/9/1
- 【Language】English
- 【Status】Active