FORD
Search Result: About 4343 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】FORD
- 【Document #】FORD WSS-M99P33-A
STRUCTURAL PERFORMANCE, CAVITY REINFORCING ENGINEERED PARTS, HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
- 【Date】2016/11/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WD 253
TAPTITE 2000 THREAD ROLLING SCREW PAN HEAD – SELECTIVELY HARDENED ENHANCED 6 LOBE DRIVE CATEGORY 080.030
- 【Date】2016/11/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WRS-M4D952-A4
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, 75% RECYCLED MATERIAL BY WEIGHT ***TO BE USED WITH FORD WSS-M99P1111-A***
- 【Date】2016/11/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSS-M99D69-A1
TUBING, POLYOLEFIN, SINGLE WALL, HEAT SHRINKABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- 【Date】2016/11/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSS-M99D69-A2
TUBING, POLYOLEFIN, SINGLE WALL, HEAT SHRINKABLE, FLAME RETARDANT ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M99D69-A1
- 【Date】2016/11/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSK-M2G384-A1
ADHESIVE, EPOXY, FOR METAL REINFORCEMENT, ADFOSY SPRAYABLE, HEAT CURING, ADFOSY ***TO BE USED WITH FORD WSS-M99P1111-A***
- 【Date】2016/10/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSS-M2G575-A
ADHESIVE, EPOXY, WELDABLE, THERMAL CURE, STRUCTURAL, HEM FLANGE ***TO BE USED WITH FORD WSS-M99P1111-A***
- 【Date】2016/10/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSB-M2G373-A
ADHESIVE, HEM FLANGE, ALUMINUM BONDING, TWO COMPONENT 150 - 180 MINUTE GEL POINT, 70 - 90 °C GEL POINT ***TO BE USED WITH FORD WSS-M99P1111-A***
- 【Date】2016/10/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSS-M2G373-B
ADHESIVE, HEM FLANGE, STEEL BONDING, TWO COMPONENT 90 - 120 MINUTE GEL POINT, 100 - 120 °C GEL POINT ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSB-M2G373-A
- 【Date】2016/10/1
- 【Language】English
- 【Status】Active
- 【Organization】FORD
- 【Document #】FORD WSS-M2G299-B8
ADHESIVE, SEALER, SYNTHETIC RUBBER, WARM APPLIED 60 - 70 °C, HEAT CURING, LONG TERM FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSK-M2G299-B1
- 【Date】2016/10/1
- 【Language】English
- 【Status】Active