ISO
搜尋結果：找到 21829 筆資料
- 【組 織】ISO
- 【文件編號】ISO 19403-5
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 19403-6
Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 19403-7
Paints and varnishes - Wettability - Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 11093-8
Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis - Third Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 21809-5
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings - Second Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13061-1 AMD 1
Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 1: Determination of moisture content for physical and mechanical tests AMENDMENT 1 - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13061-15
Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 15: Determination of radial and tangential swelling - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13061-16
Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 16: Determination of volumetric swelling - First edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13061-2 AMD 1
Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 2: Determination of density for physical and mechanical tests AMENDMENT 1 - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13061-3 AMD 1
Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 3: Determination of ultimate strength in static bending AMENDMENT 1 - First Edition
- 【日 期】2017/6/1
- 【語 言】English
- 【狀 態】Active
