Hinton Information Services

Need Some Help?
We can help you find the information that meets your research needs.
Please call us at
+886 2 27993110
or send an email to us at standards@hintoninfo.com

Organization / Document #
FORD
Search Result: About 4343 results.

Breadcrumb

  • 【Organization】FORD
  • 【Document #】FORD WSL-M2C192-A

  • LUBRICANT, SAE 75W-140, HYPOID GEAR, SYNTHETIC ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/5/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSK-M2D457-A3

  • POLYACRYLIC (ACM) RUBBER, ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSK-M2D457-A2

  • 【Date】2010/5/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSA-M4D768-A

  • POLYAMIDE (PA) 66, HEAT STABILIZED, 33% GLASS FIBER REINFORCED, TRANSLUCENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/5/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSK-M4D556-A4

  • POLYPROPYLENE COPOLYMER, 15% MINERAL FILLED, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSK-M4D556-A

  • 【Date】2010/5/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-A2

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-B2

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET BASECOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-A4

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-B4

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET CLEARCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-A3

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2/WSS-M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-B3

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET MIDCOAT, PROCESSED WITH WSS-M33J10-B1/WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active