Hinton Information Services

Need Some Help?
We can help you find the information that meets your research needs.
Please call us at
+886 2 27993110
or send an email to us at standards@hintoninfo.com

Organization / Document #
FORD
Search Result: About 4343 results.

Breadcrumb

  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-A1

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-A2/WSS M33J10-A4, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-B1

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET PRIMER, PROCESSED WITH WSS-M33J10-B2/WSS-M33J10-B4, REDUCED VISCOSITY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M33J10-A5

  • ENAMEL, (3 WET) COMPLIANCE VOC, HIGH SOLIDS THERMOSET TINTED CLEARCOAT, PROCESSED WITH WSS-M33J10-A1/WSS-M33J10-A2, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSS-M33J10-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSB-M64J28-C1

  • PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, GRAY, 180 DEGREES C BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A*** - Shown on FORD WSB-M64J28-A1

  • 【Date】2010/4/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M2C936-A

  • FLUID, WET DOUBLE CLUTCH TRANSMISSION, FULL-SYNTHETIC ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/3/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M2C200-D2

  • LUBRICANT, GEAR, FUEL ECONOMY, SYNTHETIC HYDROCARBON ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/3/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M3B75-A

  • PHOSPHATE SOLUTION, ZINC, PASSIVATION SOLUTION ph-REGULATION ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/3/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WM 200

  • PLUG – PORT, O-RING HEX RECESS CATEGORY 100.090

  • 【Date】2010/3/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WM101

  • PLUG - SHORT, TAPER HEXAGON RECESS CATEGORY 090.230

  • 【Date】2010/3/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】FORD
  • 【Document #】FORD WSS-M4D939-A1

  • POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 33% TALC FILLED, 25% MIN RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

  • 【Date】2010/3/1
  • 【Language】English
  • 【Status】Active